|
|
|
Quadra Bag Rear Suspension System - (X101)
$1,395.00
[info] [order]
Systems available in black as shown or in zinc plating Features:
-2 piece construction for easy bolt in installation in about 4-6 hrs.
-Outboard air line connections to air bags for easier connections.
-Heavy gauge steel construction
-Larger, more weight carrying air bags
-Safe and convenient ability to travel to a repair shop in the case of an airbag blowout.
-Lower air pressure requirements.
-More travel up and down for height adjustment.
-Back rear tire skidding is minimized by 60%
-T-Skirts can still be used by utilizing a special mount.
"With this kit, your coach will have a full 6 wheel independent suspension!"-Jim Bounds
Quadra Bag Installation Instructions
Quadra Bag Diagram |
|
|
Chuck Auglur Rear Reaction Anti-Skid Kit
$2,395.00
[info] [order]
This item prevents the back rear wheels from skidding which provides an extra margin of safety. It eliminates torque on the center bogie arms. It provides more effective braking on all four rear wheels. It prevents flat spots on tires.
|
|
|
|
|
|
|
|
|
Air Bag Isolator Kit - (X108)
$75.00
[info] [order]
Air Bag Isolator Kit - Locks out the airbag. Useful if you get a leak in your air lines. Give you the ability to bypass the compressor and height control valves and pressurize the air bag directly. Unlike needle valves, these valves will not leak at the stems!
|
|
|
|
|
|
|
|
|
|
|
|
|
AIR COMPRESSOR ( DANA)
$198.00
[info] [order]
REBUILT AIR COMPRESSOR FOR 1973 TO 1977 GMC AIR SUSPENSION SYSTEM. CORE CHARGE $90.00 REFUNDABLE
SHIP WITHOUT PLASTIC COVER DUE TO EXCESSIVE FREIGHT DAMAGES.
|
|
|
AIR COMPRESSOR REBUILD KIT
$79.95
[info] [order]
REBUILT KIT COMES COMPLETE WITH TOOL TO HOLD THE CRANK IN PLACE. INSTRUCTIONS ARE INCLUDED AS SHOWN. REFUNDABLE CORE CHARGE $60.00 SEND OLD PISTONS BACK ONLY. |
|
|
|
|
|
TUBING FOR SUSPENSION
$0.00
[info] [order]
Tubing for suspension.
Red- foot
Blue foot
Black foot
Purple foot
Yellow foot
Gray foot
Please enter how many feet you will need at checkout. Quanity 1 = 1 foot. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grease Fitting Covers (14-13)
$2.25
[info] [order]
Grease Fitting Covers
These covers are an excellent way to keep your greasefittings clean so that dirt is not forced in along with the grease. It is not necessary to completely remove the cove when applying the grease.Covers are bright yellow for easy identification and location.
|
|
|
Bogie Pin Greaser Kit - (X105)
$70.00
[info] [order]
Greasing the rear bushings in a GMC have always been problematical. This kit makes it a snap! Includes four greasers
Bogie Greaser Installation Instructions:
Clean out the grease channel as follows:
#1 - Remove existing grease fitting
#2 - Insert a plastic straw at least 8 inches into opening (McDonald's straws work great!)
#3 - Twist straw several times
#4 - Place finger on end of straw to create a vacuum and remove
#5 - Insert Bogie Greaser into opening and grease both Zerk fittings
#6 - Repeat process for the remaining three pins
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
