|
|
|
|
|
HUBLER HD Front End Kit - (16-1000)
$2,698.00
[info] [order]
ENDORSED BY BILL HUBLER.
LOWER "A" ARMS REBUILT BY BILL HUBLER WITH BEEFED UP TORSION BAR SOCKETS.
THE ONLY COMPLETE UNIT FOR THE GMC MOTORHOME.
.COMES WITH:
1)TIMKEN BEARINGS
2)BRAKE CALIPERS (SUPPLIED)
3)BRAKE HOSES (SUPPLIED)
4)BRAKE PADS (SUPPLIED)
5)12" ROTORS,NEW AXELS AND CV JOINTS,KNUCLES,LOWER & UPPER BALL JOINTS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grease Fitting Covers (14-13)
$2.25
[info] [order]
Grease Fitting Covers
These covers are an excellent way to keep your greasefittings clean so that dirt is not forced in along with the grease. It is not necessary to completely remove the cove when applying the grease.Covers are bright yellow for easy identification and location.
|
|
|
HD Front Stabilizer Bar - (16-1011)
$298.50
[info] [order]
The front stabilizer bar's purpose is to control and minimize the side-to-side sway of your GMC motorhome when driving on uneven roads or when passing another vehicle. It reduces the tendency to drift along with body roll. All hardware is included for easy installation
|
|
|
|
|
|
|
Refurbished Control Arms - (16-1014)
$1,049.00
[info] [order]
One set of 2 LH and 2 RH Upper and Lower Control Arms with NEW ball joints and NEW Grommets. Includes Reinforced Torsion Bar Sockets and other areas. RebuildableCore exchange required *** NO CREDIT ON CORE FOR 73 A FRAMES !!!
|
|
|
|
|
|
|
|
|
|
|
|
|
Steering Idler Arm - (16-1018)
$220.00
[info] [order]
Rebuilt. The rubber bushing is removed from the cross member pivot end of your GMC motorhome. This end is machined and fitted with a bronze bushing, hardened sleeve, thrust washers, and a grease fitting. The ball stud end is cut apart; a new urethane bushing is installed. A new threaded cap with thrust washer and grease fitting is installed. With your rebuildable core
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steering Damper - (16-1021)
$39.95
[info] [order]
All Weather Fluid - Reduces friction and ensures a smooth rod reaction
1-3/16" Bore - Provides more efficient and consistent control
Nitrogen Gas Charged - Improved ride and handling
1/2" Nitrocarbonized Piston Rod - Longer life
Special Seal - "Self-Lubricating" fluid seal retains gas without excessive wear or friction
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|