$649.95

ALL STAINLESS STEEL HEADERS COMES WITH REDUCERS BOLTS AND REMFLEX GASKETS

Quantity:

$639.00

 

Designed SPECIFICALLY for the GMC MOTORHOME to produce Low End Torque.

Comes with oxygen sensor ports.

Headers greatly reduce engine temperature by more efficiently drawing the exhaust gasses out. Lowering the temperature of the cylinder and the combustion chamber creates a denser fuel charge and therfor allows your engine to create more power.

Ceramic coating is a high luster silver color that will not discolor with the introduction of heat and is more resistant to corrosion and heat at even higher temperatures. It creates a thermal barrier which lowers the undershood temperature and adds life to your headers. The approximate dimensions of the package is 36hx20wx16L.

GM08-006-50-B

Quantity:

$49.98

STAINLESS STEEL BLOCK OFF PLATE WITH NOTCHED INTAKE GASKET.NO NEED FOR OTHER DEVICES.PLEASE INDICATE 403 OR 455 CID GM08-006-21B

403
455

Quantity:

$27.95

Thorley Header Gasket

GM12-030-THORGAKT SOLD IN PAIRS ONLY

Quantity:

$30.00

Remflex Gasket GM12-REMFLEX

WITH HEADERS
STANDARD MANIFOLD

Quantity:

$35.00

OPTIMUM SEAL FOR HEADERS--- FILLS GAPS IN DISTORTED/WARPED FLANGES ----MADE FROM DEAD SOFT ALUMINUM WILL NOT SHRINK,DETERIORATE OR BLOW OUT-- AND IT'S REUSABLE!!!!! GM12-ALUMGASK

Quantity:

$61.95

Embosed Copper Exhaust Manifold Gasket-GM08-006-50.2A

Quantity:

$34.95

RESISTS VIBRATING LOOSE-- SUPER HARD CAM LOCKING WASHERS -- NO LITTLE CLIPS OR RETAINERS TO HANDLE---OIL ACTUALLY IMPROVES PERFORMANCE --- ECONOMICAL AND REUSABLE KIT INCLUDES 12 BOLTS 3/8 X 1" GM12-66751

Quantity:

$16.95

The original exhaust manifold bolts lock system for some reason completely ignores the center bolt. We have developed a bolt lock system that applies to the manifold bolts in exactly the same manner at the originals but has the added feature of providing a locking function to the center bolt.We believe that the use of our 5-bolt lock will provide a significant improvement to the longevity of the exhaust manifold gasket. The lock plates are CNC machined from 18 gauge galvanized sheet steel, sold as a pair to do both exhaust manifolds, and are shipped with a tips sheet providing installation suggestions. GM12-030-MANBLTLK

Quantity:

$6.85

keep the pipes tight with these spring loaded exhaust bolt. note: these are the bolts that hold the exhaust pipe to the exhaust manifold

Quantity:

$0.00

TO REPLACE THE DETERIORATED HIGH TEMPERATURE RUBBER AND RETAINER CUP. STAINLESS STEEL PAINTED. GM12-030-MUFBEAR

SILICON RUBBER	39.98
BRACKET	52.95

Quantity:

$0.00

*8 Year Warranty on All Parts

Style 1 and Style 2 :

Style 1 using 2 each magna flow mufflers and Style 2 using one CUSTOM STAINLESS STEEL FLOWMASTER DESIGN muffler at the rear. Stainless steel band clamps

2.5" and 3" Mandrel bent stainless steel pipes

 

Installation Instructions GM12-030-SSMUFKT

STYLE 1	$985.00
STYLE 2	$1225.00

Quantity:

$895.00

*8 Year Warranty on All Parts

Style 1 and Style 2:

Style 1 using two each Magna flow muffler and Style 2 using one each CUSTOM STAINLESS STEEL FLOWMASTER DESIGN MUFFLER at the rear Non-band clamps

2.5" and 3" Mandrel bent aluminized steel pipes

 

Installation Instructions GM12-030-ALMUFKT

STYLE 1	$895.00
STYLE 2	$1135.00

Quantity:

$259.95

FLOW MASTER DESIGN REPLACES ALUMINIZE ONES

Quantity:

$59.98

Exhaust Heat Shields for Fuel Tanks Here is a kit of items to shield the heat from the exhaust pipe to the fuel tank.The factory installed these shields to help minimize problems of overheating the fuel and vaptor lock. The 20 gauge steel heat shiels are power coated white to minimize the heater transfer to the tank through absorption and re-radiation.these shields are like the original heat shieldswhich had 3/8" bend on bothsides, but I extended the upper bend, which installs over the exhaust pipe to 2" to provide additional heat isolation to the fuel tank. GM12-030-HTSHLD

Quantity:

$35.98

GM12-35567

Quantity:

$0.00

Quantity: